This video analyzes structural techniques to get a more durable, more solid 3D Printed object

As the 2013 golf season is coming to a close for some of us, we look back at the 2013 season and think about the amount of time, money, and effort spent this season out on the course. One might look back on those beautiful, mid summer afternoons and reminisce on the good rounds, the […]

The Science Fiction book 21st Century Robot explores the fictional world of Jimmy the Robot and his human, Simon Egerton. Future release of the book will contain open source design files for you to modify your very own 3D printable Jimmy the Robot! You can be a part of designing and building 21st Century Robots. […]

This 3D Printer has no walls and no boundaries. So you can print a toy, a statue, even an airplane wing

This may be the award winner this year for 3D Printing Technology. This 3D Printing use stretched far and wide into medicine and prosthetics

Kids should have fun with evolution! These scientist-approved 3D-printable models of prehistoric life and info cards make learning fun.

What would you 3D Print? Our on the ground reporter interviews and asks that question. Do these people also know there is a 3d printing podcast available?

3D printing technology has completely taken the world by storm. Though it is new to some ears, architects and engineers have actually been been using it for more than a decade. It’s popularity over the last couple of years has been fanned by the fact that it offers industries an inexpensive way of creating prototypes […]

3D Print Buildings? Is this futuristic or are people doing it now? The Book, How to 3D Print Money talks about 3D Printed buildings

Imagine how much easier it would be to manufacture a car if you could prototype small-scale, physical car parts? The video below shows how Bentley uses Stratasys 3D Printing to model small versions of designs for hubcaps, tires and their treads, auto bodies, interiors, and more. Bentley can efficiently prototype and design top-of-the-line automobiles for […]

According to researchers at Michigan Technology University, 3D printing is greener than the alternative. 3D printing an object (from the very beginning of extracting raw materials to the very end in depositing the material layer by layer to produce a 3D result) takes “41 to 64 percent less energy than making it in a factory.” […]

Much attention has been paid to 3D Printing lately, with new companies developing cheaper and more efficient consumer models that have wowed the tech community. They herald 3D Printing as a revolutionary and disruptive technology, but how will these printers truly affect our society? Beyond an initial novelty, 3D Printing could have a game-changing impact […]

Cody and Tyler Kor, 20 and 22 respectively, plan to travel from coast to coast and back approximately two years from now in Urbee 2, the 3D-printed car their father Jim Kor and a team of engineers built. The Urbee has been a project since 1996, a project meant to create a low-energy car. They […]

Mataerial, a collaborative project between Institute for Advanced Architecture of Catalonia and the Joris Laarman Studio, is pioneering a patent-pending 3D printing method it calls anti-gravity object modelling. Researchers claim ‘this new out-of-the-box printing method can help manufacture structures of almost any size and shape’. This video is three times the normal speed.

Welcome to the future. The 3D Printing Podcast wants this be your resource to hear podcasts about the 3D Printing Industry. We will keep them light, informative and entertaining. Will people be patient enough to use a 3D printer to print what they need? Is 3D printing too technical? Will 3D printers replace the assembly […]

See this quick 3D printing video and watch how a youtube expert 3D Prints his own illusions!

This quick video shows 3d Printing coming home to everyone with a 3D Printer

This report is aimed at healthcare companies looking to embrace this exciting new 3D printing technology area, materials & technology companies looking for future market opportunities, researchers looking to establish the market size and scale for AM/3DP products and services, and investors looking to support their portfolio decision making.

Shapeways.com is the world’s leading 3D Printing marketplace and community. We harness 3D Printing to help everyone make and share designs with the world, making product design more accessible, personal, and inspiring.

You can print guitars. You can print records. You can do it will an app. We are in a great time for a 3D Ecosystem

Can you guess the uses for this 3D Printed attachment? It was 3D Printed right in front of us!

So we all know that it takes incredible engineering and medical prowess to bioprint an organ or any human part – but why is it hard, even for the folks who do it? There are four levels of complexity in bioprinting. The director of the Wake Forest Institute for Regenerative Medicine in North Carolina identified […]

3D Printing Market by Technology (SLA, SLS, EBM, FDM, EBM, LOM, 3DP), Materials (Polymers, Metal), Application (Aerospace, Automotive, Consumer, Healthcare, Government & Defense) & Geography (Americas, Europe, APAC & ROW) (2013 – 2020)

We look forward to sharing content and opinions with the founders of Sols… the first 3D printed orthotic.